山东豪沃橡塑高分子量聚乙烯螺旋输送机专用耐磨内衬，uhmwpe内衬
衬板是用来保护筒体，使筒体免受研磨体和物料直接冲击和磨擦，同时也可利用不同形式的衬板来调整研磨体的运动状态，以增强研磨体对物料的粉碎作用，有助于提高磨机的粉磨效率，增加产量，降低金属消耗。
螺旋输送机衬板采用超高分子量聚乙烯材质加工生产，是一种性能优异的热塑型工程塑料，此材质具有耐磨损、耐高温、耐低温、耐冲击、耐化学腐蚀、自身润滑、重量轻、吸能、耐老化、阻燃、抗静电等优良性能。还有很高的刚性和韧性，机械强度非常好。有着电气绝缘性好和超长的使用寿命。
1、高耐磨性，摩擦系数低，表面光滑无粗糙，防止物料流动受阻；
2、不吸水性，不受物料湿度的影响，也不会因为吸水而造成物料结痂成块；
3、自润滑性，让粘结性大、不易自由流动的散装物料能够顺畅流动；
4、耐磨损性，保护设备，不受物料腐蚀引起设备故障；
5、重量轻，仅是钢材重量的七分之一，易于操作和运输；
6、环保材质，具有生理惰性和生理适应性，可回收再利用；
7、耐化学腐蚀性能，能耐一定浓度下的酸碱盐等的腐蚀，化学性能稳定。
山东豪沃橡塑有限公司位于山东省德州市宁津县，处于京津、济南、石家庄等城市构成的三角地带，位置、环境雅、交通情况便利，公司主要产品：超高分子量聚乙烯板（整板及切割板）棒，高密度挤出板（棒）、冰球场围栏、支腿垫板、含硼聚乙烯板、工程塑料合金及各种加工件；
shandong haowo rubber & plastic high molecular weight polyethylene screw conveyor special wear-resistant lining, uhmwpe lining lining plates are used to protect the cylinder from the direct impact and friction of grinding bodies and materials. at the same time, different forms of lining plates can be used to adjust the movement state of grinding bodies, so as to enhance the grinding effect of grinding bodies on materials, which is helpful to improve the grinding efficiency of the mill, increase the output and reduce the metal consumption. the liner of screw conveyor is made of ultra-high molecular weight polyethylene, which is a kind of thermoplastic engineering plastic with excellent performance. this material has excellent properties such as wear resistance, high temperature resistance, low temperature resistance, impact resistance, chemical corrosion resistance, self-lubrication, light weight, energy absorption, aging resistance, flame retardant and antistatic. it also has high rigidity and toughness and excellent mechanical strength. it has good electrical insulation and long service life.
1, high wear resistance, low friction coefficient, smooth surface without roughness, preventing material flow from being blocked;
2. non-absorbent, which is not affected by the humidity of materials, and will not cause scabs and lumps of materials due to water absorption;
3. self-lubricating property, so that bulk materials with high cohesiveness and difficult free flow can flow smoothly;
4. wear resistance, protecting equipment from equipment failure caused by material corrosion;
5. light weight, only one seventh of the weight of steel, easy to operate and transport;
6. environmentally-friendly materials, with physiological inertia and adaptability, can be recycled;
7. chemical corrosion resistance, resistance to the corrosion of acid, alkali and salt at a certain concentration, and stable chemical performance.
欢迎来到山东豪沃橡塑有限公司网站， 具体地址是山东德州宁津县宁津县东部新区胡苏路南首，联系人是李永鹏。
主要经营塑料板相关产品。
单位注册资金未知。